Hatteland 26″ Series 1 Widescreen TFT Display Multi-Power AC/DC 1920 X 1200

Hatteland 26" Series 1 Widescreen TFT Display Multi-Power AC/DC  1920 X 1200 

JH26T11MMD-MA1-AOBA  

 

 

 

26" Series 1 Display: AC Power, Optical Bonding, Knob Controller, Brightness: 350 cd/m2, Native Resolution: 1920 x 1200, Contrast Ratio: 1500:1, Aspect Ratio: 16:10, CCFL, PIP & PBP 

 

Hatteland 25.54" Series 1 Widescreen Display Features

JH 26T11 MMD Widescreen 

This Series 1 widescreen is by factory default optically bonded which ensures that the unit offers excellent viewing clarity and will not suffer from condensation or misting. Further, Optical Bonding Technology strengthens the display against impact, making it extremely durable in all conditions.
_
-
-
-
Signal input/output options can be increased upon request by using the Multifunction Connector, which allows the connection of many common signal types through a single cable connection, for common signals such as; Composite Video Input, Touch Screen and Serial Communication. By factory standards the unit is ECDIS Compliant and feature LED or CCFL Backlight Technology.
-
-
T E S T I N G / A P P R O V A L S &                              C E R T I F I C A T E S
This product have been tested / type approved by the following classification societies:
  • IEC 60945 4th (EN 60945:2002)
  • ClassNK - Nippon Kaiji Kyokai
  • GL - Germanischer Lloyd
  • DNV - Det Norske Veritas
  • ABS - American Bureau of Shipping 
  • LRS - Lloyd''s Register of Shipping 
  • BV - Bureau Veritas 
  • LRS - Lloyd’s Register of Shipping
 
 
TFT Technology:
High Quality TFT with LED or CCFL Backlight Technology Optical Bonding Terchnology. 25.54 inch viewable image size - Widescreen, Aspect Ratio 16:10 S-MVA, Active Matrix, Thin Film Transistor (TFT) RGB Vertical Stripe
 
TFT Characteristics:
Native Resolution : 1920 x 1200Pixel Pitch (RGB) : 0.2865 (H) x 0.2865 (V) mmResponse Time (CCFL) : 8 ms (typical), "gray" to "gray"

Response Time (LED) : 20 ms (Tr+Tf)Contrast Ratio : 1500:1 (typical)

Light Intensity : 350 cd/m2 (typical)

Viewable Angle : +/- 88 deg. (typical) (Up/Down/Left/Right)

Active Display Area : 550.08 (H) x 343.8 (V) mm

Max Colors : 16.7 millions

 
Synchronization:
Sync Signal:
  • Digital separate synchronisation
  • Composite synchronisation
  • Synchronisation on green.
  • Auto detects VGA -> WUXGA, interlaced and non interlaced
  • Video Signal : Analog RGB 0,7Vp-p

                  : Input Impedance 75 Ohm

Synchronization Range:
Horizontal : 15,0 kHz to 91,1 kHzVertical : 60 Hz* to 85 Hz* Recommended for optimum picture quality
 
 
Supported Signals:
Resolutions:
• VGA : 640 x 480 (including 640 x 350)
• SVGA : 800 x 600 (including 720 x 400)
• XGA : 1024 x 768
• SXGA : 1280 x 1024
• UXGA : 1600 x 1200
• WUXGA : 1920 x 1200*
 * Recommended for optimum picture quality. (60 Hz only)
 
 
 Video Signals (with Multifunction Cable):

  • Interlaced NTSC and PAL/SECAM video
  • Composite video

 

Power Specifications:
-Power Supply Options:
-115 & 230VAC - 50/60Hz + 24 VDC*
*Multi-power note: You may connect either AC power or DC power or both. In case both sources are connected, power will be sourced from the AC input. If AC input is lost, there will be a uninterrupted switch-over to DC input._
Power Consumption:                                                    Operating : 122 W (TYP) - 185W (max)
 
Physical Considerations:
635.00 (W) x 499.00 (H) x 101.50 (D) mm                       25.00" (W) x 19.65" (H) x 4.00" (D)                                Weight: 15 kg (approx)
 
 
Signal Terminals:
  • DVI-I Signal IN : 1 x 29p DVI Female

          (or as RGB IN with adapter)

  • RGB Signal IN : 1 x 15p HD D-SUB (female)
  • RGB Signal OUT : 1 x 15p HD D-SUB (female) -

          Clone of RGB IN**

  • Multifunction : 1 x 160p D-SUB (female) -

           Also see table below

  • USB I/O : 1 x TYPE B Conn. (female)

           Reserved for future use

  • AC Power IN : 1 x Std IEC Inlet
  • If AC Power OUT : 1 x Std IEC Outlet (5A Max)
  • If DC Power IN : 1 x 2p D-SUB Connector (male) -         Amphenol FCC17

**Tested at recommended resolutions. The RGB output signal is at same resolution and sync as the RGB input. The output is working even if the display unit is turned off, but power cable/supply must be connected/provided.

 
 
Multifunction Cable:
Available factory standard cables, 30cm [11.81"] in length.

  • VSD100692-1 : 1 x 9P D-SUB (female) - RS-232 (COM1)
  • VSD100692-3 : 1 x 9P D-SUB (female) - RS-232     (COM1): 1 x 9P D-SUB (female) - RS-232 (COM Touch Screen) : 3 x BNC (female) (Composite Video in)
  • VSD100692-4 : 1 x 9P D-SUB (female) - RS-232 (COM1) : 3 x BNC (female) (Composite Video in)

Customized cables are possible to support more built-in signals, like: RS-485, RS-422/ RS-485, Buzzer, ON/OFF, Touch (PS/2), 1 x S-Video IN, Remote External User Controls, Alternative Keypad interface (i2c) and reserved for other signals. Custom cable lengths can be manufactured.

 
 
User Controls:
On front bezel - Potmeter control (IP66) xxx-xxBx models:   Power On/Off and On Screen Display Menu (push button) Brightness Control (rotary control) and Hotkeys         (left/right - push buttons) Mode Status Red/Green/Orange Illuminated LED-Ring Indicator and Speaker / Buzzer
 
 
Environmental Considerations:
Operating : Temperature -15 deg. C to +55 deg. C-     Humidity up to 95%                                                       Storage : Temperature -20 deg. C to +60 deg. C- Humidity up to 95% IP Rating : Protection (EN60529): IP66 front - IP20 rear Compass Safe Dist. : JH19T14MMD-xxx-xxxx - Std: 1.60m Steering: 1.05m
 
 
Safety Considerations:
Even although the test conditions for bridge units provide for a maximum operating temperature of 55°C, continuous operation of all electronic components should, if possible, take place at ambient temperatures of only 25°C. This is a necessary prerequisite for long life and low service costs.
Available Accessories:                                             Please call or emails us for pricing and availability
            dave@marineitsolutions.com
Cables = Custom Multifunction Cable to support more signals                                                                         JH 26BRD STD-A1 = Mounting Bracket EN60945 Tested JH 26TBR STD-A1 = Mounting BracketJH MMDRO STD-A1 = Rotary BracketJH 26TSV STD-A1 = Sun VisorJH 26VED STD-A1 = Vesa Bracket

JH 26TWC STD-A1 = Water Cover

*Please see user manual for drawings/measurements.

 

Factory Options:

  • Capacitive Touch Screen (Requires Bonding)/ Optical Bonding Technology
  • Color Calibrated models (ECDIS)

 

Hatteland 26" Widescreen Monitor AC


  • Model Number JH 26T11 MMD-MA1-AOBA
  • Usually ships in 2 - 3 Days
  • Condition: Brand New

 

 

Installation Available Upon Request

 

Price $5,199.95

 

See Our Pricing In Cart

Some of  our manufactures impose MAP restrictions we suggest you click and add to your cart for our complete pricing details.

Price: $5,199.95

Loading Updating cart...
LoadingUpdating...