Hatteland 22″ Marine Widescreen TFT Monitor AC 1680 X 1050

Hatteland 22" Marine Widescreen TFT LCD Monitor  AC

JH22T11MMD-AA1-AABA  

 

 

22" Series 1 Display: AC Power, Knob Controller, Brightness: 300 cd/m2, Native Resolution: 1680 x 1050, Contrast Ratio: 1000:1, Aspect Ratio: 16:10, CCFL, PIP & PBP. 

 

Hatteland 22" Marine Widescreen Display Features

JH 22T11 MMD Widescreen 
The Series 1 Maritime Multi Display Widescreen (MMD) uses fewer cable connections than the previous generation, which increases reliability whilst reducing component costs. All models can be delivered with either AC or DC input as standard and connections include DVI-I in, RGB out, RGB in, IEC inlet, IEC outlet and USB I/O.

T E S T I N G / A P P R O V A L S &                              C E R T I F I C A T E S
This product have been tested / type approved by the following classification societies:
  • IEC 60945 4th (EN 60945:2002)
  • ClassNK - Nippon Kaiji Kyokai
  • GL - Germanischer Lloyd
  • DNV - Det Norske Veritas
  • ABS - American Bureau of Shipping 
  • LRS - Lloyd's Register of Shipping 
  • BV - Bureau Veritas 
  • LRS - Lloyd’s Register of Shipping
 
 
TFT Technology:
• High Quality AU Optronics TFT• 22.0 inch viewable image size. Widescreen, Aspect ratio          16:10.

• Active Matrix, Thin Film Transistor (TFT)

• RGB Vertical Stripe

 
TFT Characteristics:
Native Resolution : 1680 x 1050• Pixel Pitch (RGB) :     0.282 (H) x 0.282 (V) mm• Response Time : 20 ms (typical), “black” to “white”

• Contrast Ratio : 1000:1 (typical)

• Light Intensity : 300 cd/m2 (typical)

• Viewable Angle : +/- 89 deg. (typical)   (Up/Down/Left/Right)

• Active Display Area : 473.76 (H) x 296.1 (V) mm

• Max Colors : 16.7 millions

 
Synchronization:
Sync Signal:
  • Digital separate synchronisation
  • Composite synchronisation
  • Synchronisation on green.
  • Auto detects VGA -> WUXGA, interlaced and non interlaced
  • Video Signal : Analog RGB 0,7Vp-p

                  : Input Impedance 75 Ohm

Synchronization Range:
Horizontal : 15,0 kHz to 91,1 kHzVertical : 60 Hz* to 85 Hz* Recommended for optimum picture quality
 
 
Supported Signals:
Resolutions:
• VGA : 640 x 480 (including 640 x 350)
• SVGA : 800 x 600 (including 720 x 400)
• XGA : 1024 x 768
• SXGA : 1280 x 1024
• UXGA : 1600 x 1200
• WUXGA : 1680 x 1050*
* Recommended for optimum picture quality. (60 Hz only)
 
 
 Video Signals (with Multifunction Cable):

  • Interlaced NTSC and PAL/SECAM video
  • Composite video

 

Power Specifications:
-Power Supply Options:
-115 & 230VAC - 50/60Hz 
 
Power Consumption: Operating : 100 W (max)
 
Physical Considerations:
• 572.50 (W) x 444.00 (H) x 82.00 (D) mm• 22.54" (W) x 17.48" (H) x 3.23" (D)• Weight: 14.50 kg (approx)
 
 
Signal Terminals:
  • DVI-I Signal IN : 1 x 29p DVI Female

          (or as RGB IN with adapter)

  • RGB Signal IN : 1 x 15p HD D-SUB (female)
  • RGB Signal OUT : 1 x 15p HD D-SUB (female) -

          Clone of RGB IN**

  • Multifunction : 1 x 160p D-SUB (female) -

           Also see table below

  • USB I/O : 1 x TYPE B Conn. (female)

           Reserved for future use

  • AC Power IN : 1 x Std IEC Inlet
  • If AC Power OUT : 1 x Std IEC Outlet (5A Max)
  • If DC Power IN : 1 x 2p D-SUB Connector (male) -         Amphenol FCC17

**Tested at recommended resolutions. The RGB output signal is at same resolution and sync as the RGB input. The output is working even if the display unit is turned off, but power cable/supply must be connected/provided.

 
 
Multifunction Cable:
Available factory standard cables, 30cm [11.81"] in length.

  • VSD100692-1 : 1 x 9P D-SUB (female) - RS-232 (COM1)
  • VSD100692-3 : 1 x 9P D-SUB (female) - RS-232     (COM1): 1 x 9P D-SUB (female) - RS-232 (COM Touch Screen) : 3 x BNC (female) (Composite Video in)
  • VSD100692-4 : 1 x 9P D-SUB (female) - RS-232 (COM1) : 3 x BNC (female) (Composite Video in)

Customized cables are possible to support more built-in signals, like: RS-485, RS-422/ RS-485, Buzzer, ON/OFF, Touch (PS/2), 1 x S-Video IN, Remote External User Controls, Alternative Keypad interface (i2c) and reserved for other signals. Custom cable lengths can be manufactured.

 
 
User Controls:
On front bezel - Keypad control (IP66) xxx-xxAx models:Power On/Off and On Screen Display Menu (push button) Brightness Control (up/down - push buttons) Hot keys (left/right - push buttons) Mode Status Red/Green/Orange Illuminated LED-Ring Indicator On front bezel - Potmeter control (IP66) xxx-xxBx models
Power On/Off and On Screen Display Menu (push button)• Brightness Control (rotary control)• Hotkeys (left/right - push buttons)• Mode Status Red/Green/Orange Illuminated LED-Ring  

       Indicator

• Speaker / Buzzer

 
 
Environmental Considerations:
• Operating : Temperature -15 deg. C to +55 deg. C-     Humidity up to 95%• Storage : Temperature -20 deg. C to +60 deg. C- Humidity up to 95%• IP Rating : Protection (EN60529): IP66 front - IP20 rear

• Compass Safe Dist. : JH19T14MMD-xxx-xxxx - Std: 1.60m Steering: 1.05m

 
 
Safety Considerations:
Even although the test conditions for bridge units provide for a maximum operating temperature of 55°C, continuous operation of all electronic components should, if possible, take place at ambient temperatures of only 25°C. This is a necessary prerequisite for long life and low service costs.
Available Accessories:                                             Please call or emails us for pricing and availability
             dave@marineitsolutions.com
• Cables = Custom Multifunction Cable to support more signals• JH 22BRD STD-A1 = Mounting Bracket EN60945 Tested• JH 22TBR STD-A1 = Mounting Bracket

• JH MMDRO STD-A1 = Rotary Bracket

• JH 22VED STD-A1 = VESA Bracket

• JH 22TWC STD-A1 = Water Cover

• JH 22TSV STD-A1 = Sun Visor

*Please see user manual for drawings/measurements

 

Factory Options:

  • Capacitive Touch Screen (Requires Bonding)/ Optical Bonding Technology
  • Color Calibrated models (ECDIS)

 

Hatteland 22" Widescreen Monitor AC

 

  • Model Number JH 22T11 MMD-AA1-AABA
  • Usually ships in 2 - 3 Days
  • Condition: Brand New

 

 

Installation Available Upon Request

 

Price $4,699.95

 

See Our Pricing In Cart

Some of  our manufactures impose MAP restrictions we suggest you click and add to your cart for our complete pricing details.

Price: $4,699.95

Loading Updating cart...
LoadingUpdating...