Radar

Hatteland 15″ Marine TFT LCD Monitor 115 & 230VAC – 50/60Hz

Hatteland 15″ Marine TFT LCD Monitor 115 & 230VAC – 50/60Hz

JH15T17MMD-AA1  

 

 

 

 

Hatteland 15″ Marine Multi Display Features 

The Hatteland 15″ Marine Multi Display (MMD) uses fewer cable connections than the previous generation,
which increases reliability whilst reducing component costs. All models can be delivered with either
AC or DC input as standard and connections include DVI-I in, RGB out, RGB in, IEC inlet, IEC outlet
and USB I/O.
 
 
Signal input/output options can be increased upon request by using the Multifunction Connector, which
allows the connection of many common signal types through a single cable connection, for common
signals such as; Composite Video Input, Touch Screen and Serial Communication. The models provide
 
 
Picture-By-Picture (PBP) and Picture-In-Picture (PIP) functionality.
The unit features LED Backlight Technology instead of traditional CCFL Backlighting which increases
the light intensity life time. Further, all models and variations can be offered with Optical Technology
bonding that mitigates screen misting.
 
 
T E S T I N G / A P P R O V A L S &                         C E R T I F I C A T E S
This product have been tested / type approved by the following classification societies:
  • IEC 60945 4th (EN 60945:2002)
  • ClassNK – Nippon Kaiji Kyokai
  • GL – Germanischer Lloyd
  • DNV – Det Norske Veritas
  • ABS – American Bureau of Shipping 
  • CCS – China Classification Society 
  • BV – Bureau Veritas 
  • LRS – Lloyd’s Register of Shipping
 
 
TFT Technology:
• High Quality TFT with LED Backlight Technology
• 15.0 inch viewable image size, Aspect Ratio 4:3
• TFT active-matrix liquid crystal panel
 
 
TFT Characteristics:
• Native Resolution : 1024 x 768
• Pixel Pitch (RGB) : 0.297 (H) x 0.297 (V) mm
• Response Time Standard : 8ms (typical), black to white
• Contrast Ratio Standard : 700:1 (typical)
• Light Intensity Standard : 400 cd/m² (typical)
• Viewable Angle Standard : +/- 80 deg. (Up/Down/Left/Right) (typical)
• Active Display Area : 304.1 (H) x 228.1 (V) mm
• Max Colors : 16.7 million
 
 
Synchronization:
Sync Signal:
• Digital separate synchronization
• Composite synchronization
• Synchronization on green.
• Auto detects VGA -> WUXGA, interlaced and non interlaced
• Video Signal : Analog RGB 0,7Vp-p
: Input Impedance 75 Ohm
Synchronization Range:
• Horizontal : 15,0 kHz to 91,1 kHz
• Vertical : 60 Hz* to 85 Hz
* Recommended for optimum picture quality
 
 
Supported Signals:
Resolutions:
• VGA : 640 x 480 (including 640 x 350)
• SVGA : 800 x 600 (including 720 x 400)
• XGA : 1024 x 768*
• SXGA : 1280 x 1024
• UXGA : 1600 x 1200
• WUXGA : 1920 x 1200
* Recommended for optimum picture quality. (60 Hz only)
 
 
Video Signals (with Multifunction Cable):
• Interlaced NTSC and PAL/SECAM video
• Composite video
 
 
Power Specifications:
Power Supply Options:
• 115&230VAC – 50/60Hz – JH 15T17 MMD-Axx-xxxx
• 24 VDC – JH 15T17 MMD-Dxx-xxxx
Power Consumption:
Operating : 100 W (max)
 
 
Physical Considerations:
• 412.00 (W) x 345.00 (H) x 73.00 (D) mm
• 16.22″ (W) x 13.58″ (H) x 2.87″ (D)
Weight: 7 kg (approx.)
 
 
Signal Terminals:
• DVI-I Signal IN : 1 x 29p DVI Female (or as RGB IN with adapter)
• RGB Signal IN : 1 x 15p HD D-SUB (female)
• RGB Signal OUT : 1 x 15p HD D-SUB (female) – Clone of RGB IN**
• Multifunction : 1 x 160p D-SUB (female) – Also see table below
• USB I/O : 1 x TYPE B Conn. (female) Reserved for future use
• AC Power IN : 1 x Std IEC Inlet
• AC Power OUT : 1 x Std IEC Outlet (5A Max)
• DC Power IN : 1 x 2p D-SUB Connector (male) – Amphenol FCC17
**Tested at recommended resolutions. The RGB output signal is at same resolution and sync as the
RGB input. The output is working even if the display unit is turned off, but power cable/supply must
be connected/provided.
 
 
Multifunction Cable:
Available factory standard cables, 30cm [11.81″] in length.
• VSD100692-1 : 1 x 9P D-SUB (female) – RS-232 (COM1)
• VSD100692-3 : 1 x 9P D-SUB (female) – RS-232 (COM1)
: 1 x 9P D-SUB (female) – RS-232 (COM Touch Screen)
: 3 x BNC (female) (Composite Video in)
• VSD100692-4 : 1 x 9P D-SUB (female) – RS-232 (COM1)
: 3 x BNC (female) (Composite Video in)
Customized cables are possible to support more built-in signals, like: RS-485, RS-422/
RS-485, Buzzer, ON/OFF, Touch (PS/2), 1 x S-Video IN, Remote External User Controls,
Alternative Keypad interface (i2c) and reserved for other signals. Custom cable lengths
can be manufactured.
 
 
User Controls:
On front bezel – Keypad control (IP66) xxx-xxAx models:
• Power On/Off and On Screen Display Menu (push button)
• Brightness Control (up/down – push buttons)
• Hotkeys (left/right – push buttons)
• Mode Status Red/Green/Orange Illuminated LED-Ring Indicator
On front bezel – Potmeter control (IP66) xxx-xxBx models:
• Power On/Off and On Screen Display Menu (push button)
• Brightness Control (rotary control)
• Hotkeys (left/right – push buttons)
• Mode Status Red/Green/Orange Illuminated LED-Ring Indicator
• Speaker / Buzzer
 
 
Environmental Considerations:
• Operating : Temperature -15 deg. C to +55 deg. C
– Humidity up to 95%
• Storage : Temperature -20 deg. C to +60 deg. C
– Humidity up to 95%
• IP Rating : Protection (EN60529): IP66 front – IP20 rear
• Compass Safe Dist. : JH15T17MMD-xxx-xxxx Std: 130cm Steering: 100cm
 
 
Safety Considerations:
Even although the test conditions for bridge units provide for a maximum
operating temperature of 55°C, continuous operation of all electronic
components should, if possible, take place at ambient temperatures of only
25°C. This is a necessary prerequisite for long life and low service costs.
Available Accessories:                                             Please call or emails us for pricing and availability
             dave@marineitsolutions.com
• Cables = VSD100692-3, VSD100692-4 or customized cables.
• JH 15TBR STD-B1 = Mounting Bracket (See user manual)
• JH 15TRO STD-A1 = Rotary Bracket (See user manual)
• JH 15TSV STD-A1 = Sun Visor (See user manual)
• JH 15VED STD-A1 = Vesa Bracket (See user manual)
• JH 15TAP STD-A1 = 15″ Adapter Frame to 19″ Rack (See user manual)
• JH 15TAP STD-B1 = 15″ Adapter Frame to 17″ CRT cut out (See manual)
• JH 15TWC STD-A1= Water Cover (See user manual)

Specification

Type Number
JH 19T14 MMD-xxx-Axxx
 
TFT Technology
LED Backlight Technology, TFT Active-matrix, 
MVA (Multi-domain Vertical Alignment) LCD Technology
 
Viewable Size and Active Area
19.0 inch – 376.32 [14.82”] (H) x 301.05 [11.85”] (V) mm [inch]
 
Native Resolution and Pixel Pitch
1280 x 1024 (SXGA) – 0.294 (H) x 0.294 (V) mm
 
Aspect Ratio and Response Time
5:4 – 20ms (typ)
 
Light Intensity and Contrast Ratio
300 cd/m² (typ) – 1000:1 (typ)
 
View Angle and Max Colors
89 deg. (up/down/left/right) – 16.7 million
 
Synchronization Signal Auto-detect
Digital Separate Sync., Composite Sync., Sync. On Green
 
Synchronization Range
15.0 kHz to 91.1 kHz (H) – 60 Hz to 85 Hz (V)
 
Optimal Resolution and Hz
1280 x 1024 @ 60 Hz
 
Detectable Resolutions
640 x 350, 640 x 480, 720 x 400, 800 x 600, 1024 x 768, 1280 x 1024,
1600 x 1200, 1920 x1200
 
Video Input(s)
With Multifunction Cable
Supported Video Signals
SVHS & COMPOSITE Compatible
 
Product Features
LED Backlight Technology, PBP (Picture By Picture),
PIP (Picture In Picture), Multifunction Connector,
Multi-power AC & DC, Hotkey Functionality, Dimmable 0-100%
 
Power Specifications and Consumption
Multi-power 115/230VAC – 50/60Hz + 24 VDC
or Single-power 115/230VAC – 50/60Hz
50W (typ) – 60W (max)
 
User Controls and Activity
Power On/Off + On Screen Display Menu (push button) 
Brightness Control
Hotkeys (left/right – push buttons) 
Mode Status Illuminated LED-Ring Indicator
 
Connectors
• DVI IN: 1 x DVI-I 29P (female)
• RGB IN: 1 x HD D-SUB 15P (female)
• RGB OUT: 1 x HD D-SUB 15P (female)
• Multifunction: 1 x D-SUB 160P (female)
• USB: 1 x Type B (female)
• AC Power IN: 1 x Std. IEC inlet
• If AC Power OUT: 1 x Std. IEC outlet (5A max)
• If DC Power IN: 1 x 2P D-SUB (male) Amphenol FCC17
 
Product Dimensions and Weight
W:483.00 [19.02”] x H:444.00 [17.48”] x D:82.00 [3.23”] mm [inch]
Approx 12kg / 26lbs
 
Product Carton Size and Weight
L:600.00 [23.62”] x W:560.00 [22.05”] x H:220.00 [8.66”] mm [inch]
12.0kg / 26.4lbs
 
Factory Options
• Resistive or Capacitive Touchscreen
• Keypad only or Keypad+Potmeter+Buzzer controls
• Optical Bonding Technology
• Speaker / Buzzer 
• Color Calibrated models (ECDIS)
 
Capabilities / Prepared for
N/A
 
Operating Temperature
-15.0°C / 5.0°F to 55.0°C / 131.0°F, Humidity up to 95%
 
Storage Temperature
-20.0°C / -4.0°F to 60.0°C / 140.0°F, Humidity up to 95%
 
IP Rating
Protection: IP66 front – IP20 rear (EN60529)
 
Compass Safe Distance
Standard: 160.00 [62.99”] – Steering: 105.00 [41.34”] cm [inch]
Specifications last updated: May 06, 2013 – 10:15

 

 

  • Hatteland Model Number JH15T17MMD-AA1-AAAA
  • Usually ships in 2 – 3 Days
  • Condition: Brand New

 

 

Installation Available Upon Request

 

Price $3,599.95

 

See Our Pricing In Cart

Some of  our manufactures impose MAP restrictions we suggest you click and add to your cart for our complete pricing details.

Price: $3,599.95

Loading Updating cart…

Hatteland 15″ Marine TFT LCD Monitor 24 VDC

Hatteland 15″ Marine TFT LCD Monitor 24 VDC

JH15T17MMD-DA1  

 

 

 

 

Hatteland 15″ Marine Multi Display Features 

The Hatteland 15″ Marine Multi Display (MMD) uses fewer cable connections than the previous generation,
which increases reliability whilst reducing component costs. All models can be delivered with either
AC or DC input as standard and connections include DVI-I in, RGB out, RGB in, IEC inlet, IEC outlet
and USB I/O.
 
 
Signal input/output options can be increased upon request by using the Multifunction Connector, which
allows the connection of many common signal types through a single cable connection, for common
signals such as; Composite Video Input, Touch Screen and Serial Communication. The models provide
 
 
Picture-By-Picture (PBP) and Picture-In-Picture (PIP) functionality.
The unit features LED Backlight Technology instead of traditional CCFL Backlighting which increases
the light intensity life time. Further, all models and variations can be offered with Optical Technology
bonding that mitigates screen misting.
 
 
T E S T I N G / A P P R O V A L S &                         C E R T I F I C A T E S
This product have been tested / type approved by the following classification societies:
  • IEC 60945 4th (EN 60945:2002)
  • ClassNK – Nippon Kaiji Kyokai
  • GL – Germanischer Lloyd
  • DNV – Det Norske Veritas
  • ABS – American Bureau of Shipping 
  • CCS – China Classification Society 
  • BV – Bureau Veritas 
  • LRS – Lloyd’s Register of Shipping
 
 
TFT Technology:
• High Quality TFT with LED Backlight Technology
• 15.0 inch viewable image size, Aspect Ratio 4:3
• TFT active-matrix liquid crystal panel
 
 
TFT Characteristics:
• Native Resolution : 1024 x 768
• Pixel Pitch (RGB) : 0.297 (H) x 0.297 (V) mm
• Response Time Standard : 8ms (typical), black to white
• Contrast Ratio Standard : 700:1 (typical)
• Light Intensity Standard : 400 cd/m² (typical)
• Viewable Angle Standard : +/- 80 deg. (Up/Down/Left/Right) (typical)
• Active Display Area : 304.1 (H) x 228.1 (V) mm
• Max Colors : 16.7 million
 
 
Synchronization:
Sync Signal:
• Digital separate synchronization
• Composite synchronization
• Synchronization on green.
• Auto detects VGA -> WUXGA, interlaced and non interlaced
• Video Signal : Analog RGB 0,7Vp-p
: Input Impedance 75 Ohm
Synchronization Range:
• Horizontal : 15,0 kHz to 91,1 kHz
• Vertical : 60 Hz* to 85 Hz
* Recommended for optimum picture quality
 
 
Supported Signals:
Resolutions:
• VGA : 640 x 480 (including 640 x 350)
• SVGA : 800 x 600 (including 720 x 400)
• XGA : 1024 x 768*
• SXGA : 1280 x 1024
• UXGA : 1600 x 1200
• WUXGA : 1920 x 1200
* Recommended for optimum picture quality. (60 Hz only)
 
 
Video Signals (with Multifunction Cable):
• Interlaced NTSC and PAL/SECAM video
• Composite video
 
 
Power Specifications:
Power Supply Options:
• 115 & 230VAC – 50/60Hz – JH 15T17 MMD-Axx-xxxx
• 24 VDC – JH 15T17 MMD-Dxx-xxxx
Power Consumption:
Operating : 100 W (max)
 
 
Physical Considerations:
• 412.00 (W) x 345.00 (H) x 73.00 (D) mm
• 16.22″ (W) x 13.58″ (H) x 2.87″ (D)
Weight: 7 kg (approx.)
 
 
Signal Terminals:
• DVI-I Signal IN : 1 x 29p DVI Female (or as RGB IN with adapter)
• RGB Signal IN : 1 x 15p HD D-SUB (female)
• RGB Signal OUT : 1 x 15p HD D-SUB (female) – Clone of RGB IN**
• Multifunction : 1 x 160p D-SUB (female) – Also see table below
• USB I/O : 1 x TYPE B Conn. (female) Reserved for future use
• AC Power IN : 1 x Std IEC Inlet
• AC Power OUT : 1 x Std IEC Outlet (5A Max)
• DC Power IN : 1 x 2p D-SUB Connector (male) – Amphenol FCC17
**Tested at recommended resolutions. The RGB output signal is at same resolution and sync as the
RGB input. The output is working even if the display unit is turned off, but power cable/supply must
be connected/provided.
 
 
Multifunction Cable:
Available factory standard cables, 30cm [11.81″] in length.
• VSD100692-1 : 1 x 9P D-SUB (female) – RS-232 (COM1)
• VSD100692-3 : 1 x 9P D-SUB (female) – RS-232 (COM1)
: 1 x 9P D-SUB (female) – RS-232 (COM Touch Screen)
: 3 x BNC (female) (Composite Video in)
• VSD100692-4 : 1 x 9P D-SUB (female) – RS-232 (COM1)
: 3 x BNC (female) (Composite Video in)
Customized cables are possible to support more built-in signals, like: RS-485, RS-422/
RS-485, Buzzer, ON/OFF, Touch (PS/2), 1 x S-Video IN, Remote External User Controls,
Alternative Keypad interface (i2c) and reserved for other signals. Custom cable lengths
can be manufactured.
 
 
User Controls:
On front bezel – Keypad control (IP66) xxx-xxAx models:
• Power On/Off and On Screen Display Menu (push button)
• Brightness Control (up/down – push buttons)
• Hotkeys (left/right – push buttons)
• Mode Status Red/Green/Orange Illuminated LED-Ring Indicator
On front bezel – Potmeter control (IP66) xxx-xxBx models:
• Power On/Off and On Screen Display Menu (push button)
• Brightness Control (rotary control)
• Hotkeys (left/right – push buttons)
• Mode Status Red/Green/Orange Illuminated LED-Ring Indicator
• Speaker / Buzzer
 
 
Environmental Considerations:
• Operating : Temperature -15 deg. C to +55 deg. C
– Humidity up to 95%
• Storage : Temperature -20 deg. C to +60 deg. C
– Humidity up to 95%
• IP Rating : Protection (EN60529): IP66 front – IP20 rear
• Compass Safe Dist. : JH15T17MMD-xxx-xxxx Std: 130cm Steering: 100cm
 
 
Safety Considerations:
Even although the test conditions for bridge units provide for a maximum
operating temperature of 55°C, continuous operation of all electronic
components should, if possible, take place at ambient temperatures of only
25°C. This is a necessary prerequisite for long life and low service costs.
Available Accessories:                                             Please call or emails us for pricing and availability
             dave@marineitsolutions.com
• Cables = VSD100692-3, VSD100692-4 or customized cables.
• JH 15TBR STD-B1 = Mounting Bracket (See user manual)
• JH 15TRO STD-A1 = Rotary Bracket (See user manual)
• JH 15TSV STD-A1 = Sun Visor (See user manual)
• JH 15VED STD-A1 = Vesa Bracket (See user manual)
• JH 15TAP STD-A1 = 15″ Adapter Frame to 19″ Rack (See user manual)
• JH 15TAP STD-B1 = 15″ Adapter Frame to 17″ CRT cut out (See manual)
• JH 15TWC STD-A1= Water Cover (See user manual)

Specification

Type Number
JH 19T14 MMD-xxx-Axxx
 
TFT Technology
LED Backlight Technology, TFT Active-matrix, 
MVA (Multi-domain Vertical Alignment) LCD Technology
 
Viewable Size and Active Area
19.0 inch – 376.32 [14.82”] (H) x 301.05 [11.85”] (V) mm [inch]
 
Native Resolution and Pixel Pitch
1280 x 1024 (SXGA) – 0.294 (H) x 0.294 (V) mm
 
Aspect Ratio and Response Time
5:4 – 20ms (typ)
 
Light Intensity and Contrast Ratio
300 cd/m² (typ) – 1000:1 (typ)
 
View Angle and Max Colors
89 deg. (up/down/left/right) – 16.7 million
 
Synchronization Signal Auto-detect
Digital Separate Sync., Composite Sync., Sync. On Green
 
Synchronization Range
15.0 kHz to 91.1 kHz (H) – 60 Hz to 85 Hz (V)
 
Optimal Resolution and Hz
1280 x 1024 @ 60 Hz
 
Detectable Resolutions
640 x 350, 640 x 480, 720 x 400, 800 x 600, 1024 x 768, 1280 x 1024,
1600 x 1200, 1920 x1200
 
Video Input(s)
With Multifunction Cable
Supported Video Signals
SVHS & COMPOSITE Compatible
 
Product Features
LED Backlight Technology, PBP (Picture By Picture),
PIP (Picture In Picture), Multifunction Connector,
Multi-power AC & DC, Hotkey Functionality, Dimmable 0-100%
 
Power Specifications and Consumption
 Single-power 24 VDC
50W (typ) – 60W (max)
 
User Controls and Activity
Power On/Off + On Screen Display Menu (push button) 
Brightness Control
Hotkeys (left/right – push buttons) 
Mode Status Illuminated LED-Ring Indicator
 
Connectors
• DVI IN: 1 x DVI-I 29P (female)
• RGB IN: 1 x HD D-SUB 15P (female)
• RGB OUT: 1 x HD D-SUB 15P (female)
• Multifunction: 1 x D-SUB 160P (female)
• USB: 1 x Type B (female)
• AC Power IN: 1 x Std. IEC inlet
• If AC Power OUT: 1 x Std. IEC outlet (5A max)
• If DC Power IN: 1 x 2P D-SUB (male) Amphenol FCC17
 
Product Dimensions and Weight
W:483.00 [19.02”] x H:444.00 [17.48”] x D:82.00 [3.23”] mm [inch]
Approx 12kg / 26lbs
 
Product Carton Size and Weight
L:600.00 [23.62”] x W:560.00 [22.05”] x H:220.00 [8.66”] mm [inch]
12.0kg / 26.4lbs
 
Factory Options
• Resistive or Capacitive Touchscreen
• Keypad only or Keypad+Potmeter+Buzzer controls
• Optical Bonding Technology
• Speaker / Buzzer 
• Color Calibrated models (ECDIS)
 
Capabilities / Prepared for
N/A
 
Operating Temperature
-15.0°C / 5.0°F to 55.0°C / 131.0°F, Humidity up to 95%
 
Storage Temperature
-20.0°C / -4.0°F to 60.0°C / 140.0°F, Humidity up to 95%
 
IP Rating
Protection: IP66 front – IP20 rear (EN60529)
 
Compass Safe Distance
Standard: 160.00 [62.99”] – Steering: 105.00 [41.34”] cm [inch]
Specifications last updated: May 06, 2013 – 10:15

 

 

  • Hatteland Model Number JH15T17MMD-DA1-AAAA
  • Usually ships in 2 – 3 Days
  • Condition: Brand New

 

 

Installation Available Upon Request

 

Price $3,599.95

 

See Our Pricing In Cart

Some of  our manufactures impose MAP restrictions we suggest you click and add to your cart for our complete pricing details.

Price: $3,599.95

Loading Updating cart…

Hatteland 19″ Marine TFT LCD Monitor Multi-Power AC/DC

Hatteland 19″ Marine TFT LCD Monitor Multi-Power AC/ DC

JH19T14MMD-MA1-AAAA  

 

 

 

19″ Series 1 Display: AC/DC Multi-Power**, Pad Controller, Brightness: 300 cd/m2, Native Resolution: 1280 x 1024, Contrast Ratio: 900:1, Aspect Ratio: 5:4, CCFL, PIP & PBP 

 

Hatteland 19″ Marine Multi Display Features

The Series 1 Maritime Multi Display (MMD) models are delivered with Multi-power (AC and DC power input built in) ensuring that they are compatible with all power systems on all vessels. It will automatically switch to whatever power is connected, making it highly fl exible for shipbuilders and system integrators alike.

 

Connections include DVI-I in, RGB out, RGB in, IEC inlet, IEC outlet and USB I/O. Signal input/ output options can be increased upon request by using the Multifunction Connector, which allows the connection of many  ommon signal types through a single cable connection, for common signals such s; Composite Video Input, Touch Screen and Serial Communication. The models provide Picture-By- Picture (PBP) and Picture-In-Picture (PIP) functionality.

 

The unit features LED Backlight Technology instead of traditional CCFL Backlighting which increases the light intensity life time. Further, all models and variations can be offered with Optical Bonding Technology that mitigates screen misting. By factory standards the unit is ECDIS Compliant. Single AC model is also available.

 

T E S T I N G / A P P R O V A L S &                              C E R T I F I C A T E S
This product have been tested / type approved by the following classification societies:
  • IEC 60945 4th (EN 60945:2002)
  • ClassNK – Nippon Kaiji Kyokai
  • GL – Germanischer Lloyd
  • DNV – Det Norske Veritas
  • ABS – American Bureau of Shipping 
  • CCS – China Classification Society 
  • BV – Bureau Veritas 
  • LRS – Lloyd’s Register of Shipping
 
 
TFT Technology:
  • High Quality TFT with LED Backlight Technology
  • 19.0 inch viewable image size, Aspect Ratio 5:4
  • TFT active-matrix liquid crystal panel
  • MVA (Multi-domain Vertical Alignment) LCD Technology
 
TFT Characteristics:
  • Native Resolution : 1280 x 1024
  • Pixel Pitch (RGB) : 0.294 (H) x 0.294 (V) mm
  • Response Time : 20ms (typical), “black” to “white”
  • Contrast Ratio : 1000:1 (typical)
  • Light Intensity Standard : 300 cd/mÇ (typical)
  • Viewable Angle : +/- 89 deg. (typical) (Up/Down/Left/Right)
  • Active Display Area : 376.32 (H) x 301.056 (V) mm
  • Max Colors : 16.7 million
 
Synchronization:
Sync Signal:
  • Digital separate synchronisation
  • Composite synchronisation
  • Synchronisation on green.
  • Auto detects VGA -> WUXGA, interlaced and non interlaced
  • Video Signal : Analog RGB 0,7Vp-p

                  : Input Impedance 75 Ohm

Synchronization Range:
Horizontal : 15,0 kHz to 91,1 kHzVertical : 60 Hz* to 85 Hz* Recommended for optimum picture quality
 
 
Supported Signals:
Resolutions:
• VGA : 640 x 480 (including 640 x 350)
• SVGA : 800 x 600 (including 720 x 400)
• XGA : 1024 x 768*
• SXGA : 1280 x 1024
• UXGA : 1600 x 1200
• WUXGA : 1920 x 1200
* Recommended for optimum picture quality. (60 Hz only)
 
 
Video Signals (with Multifunction Cable):
VGA : 640 x 480 (including 640 x 350)SVGA : 800 x 600 (including 720 x 400)XGA : 1024 x 768SXGA : 1280 x 1024*UXGA : 1600 x 1200WUXGA : 1920 x 1200* Recommended for optimum picture quality. (60 Hz only)
 
 Video Signals (with Multifunction Cable):

  • Interlaced NTSC and PAL/SECAM video
  • Composite video

 

Power Specifications:
Power Supply Options:
115&230VAC – 50/60Hz + 24 VDC – JH 19T14 MMD-Mxx-Axxx*115&230VAC – 50/60Hz – JH 19T14 MMD-Axx-Axxx
 
Power Consumption: Operating : 100 W (max)

*Multi-Power: You may connect either AC power or DC power or both. In case both sources are connected, power will be sourced from the AC input. If AC input is lost, there will be a uninterrupted switch-over to DC input.

 
Physical Considerations:
• 483 (W) x 444 (H) x 82 (D) mm /    19.02″ (W) x 17.48″ (H) x 3.23″ (D)• Weight: 11.50 kg (approx)
 
 
Signal Terminals:
  • DVI-I Signal IN : 1 x 29p DVI Female (or as RGB IN with adapter)
  • RGB Signal IN : 1 x 15p HD D-SUB (female)
  • RGB Signal OUT : 1 x 15p HD D-SUB (female) – Clone of RGB IN**
  • Multifunction : 1 x 160p D-SUB (female) – Also see table below
  • USB I/O : 1 x TYPE B Conn. (female) Reserved for future use
  • AC Power IN : 1 x Std IEC Inlet
  • If AC Power OUT : 1 x Std IEC Outlet (5A Max)
  • If DC Power IN : 1 x 2p D-SUB Connector (male) – Amphenol FCC17

**Tested at recommended resolutions. The RGB output signal is at same resolution and sync as the RGB input. The output is working even if the display unit is turned off, but power cable/supply must be connected/provided.

 
 
Multifunction Cable:
Available factory standard cables, 30cm [11.81″] in length.

  • VSD100692-1 : 1 x 9P D-SUB (female) – RS-232 (COM1)
  • VSD100692-3 : 1 x 9P D-SUB (female) – RS-232 (COM1): 1 x 9P D-SUB (female) – RS-232 (COM Touch Screen) : 3 x BNC (female) (Composite Video in)
  • VSD100692-4 : 1 x 9P D-SUB (female) – RS-232 (COM1) : 3 x BNC (female) (Composite Video in)

Customized cables are possible to support more built-in signals, like: RS-485, RS-422/ RS-485, Buzzer, ON/OFF, Touch (PS/2), 1 x S-Video IN, Remote External User Controls, Alternative Keypad interface (i2c) and reserved for other signals. Custom cable lengths can be manufactured.

 
 
User Controls:
On front bezel – Keypad control (IP66) xxx-xxAx models:Power On/Off and On Screen Display Menu (push button) Brightness Control (up/down – push buttons) Hot keys (left/right – push buttons) 

Mode Status Red/Green/Orange Illuminated

LED-Ring Indicator On front bezel – Potmeter control (IP66) xxx-xxBx models

Power On/Off and On Screen Display Menu (push button)

• Brightness Control (rotary control)

• Hotkeys (left/right – push buttons)

• Mode Status Red/Green/Orange Illuminated LED-Ring Indicator

• Speaker / Buzzer

 
 
Environmental Considerations:
• Operating : Temperature -15 deg. C to +55 deg. C– Humidity up to 95%• Storage : Temperature -20 deg. C to +60 deg. C– Humidity up to 95%• IP Rating : Protection (EN60529): IP66 front – IP20 rear• Compass Safe Dist. : JH19T14MMD-xxx-xxxx – Std: 1.60m Steering: 1.05m
 
 
Safety Considerations:
Even although the test conditions for bridge units provide for a maximum operating temperature of 55°C, continuous operation of all electronic components should, if possible, take place at ambient temperatures of only 25°C. This is a necessary prerequisite for long life and low service costs.
Available Accessories:                                             Please call or emails us for pricing and availability
            dave@marineitsolutions.com
• Cables = VSD100692-3, VSD100692-4 or customized cables

  • .JH MMDBR STD-A1 = Bracket
  • • JH 19BRD STD-A1 = Mounting Bracket EN60945 Tested
  • JH MMDRO STD-A1 = Rotary Bracket
  • • JH 19TSV STD-A1 = Sun Visor
  • • JH 19VED STD-A1 = Vesa Bracket
  • • JH 19TAP STD-A1 = 21″ CRT Adapter frame
  • • JH 19TAP STD-B1 = 21″ CRT Custom Adapter frame
  • • JH 19TAP STD-A2 = 20″ TFT Adapter frame
  • • JH 19TWC STD-B1 = Water Cover

*Please see user manual for drawings/measurements


 

  • Hatteland 19″ Monitor Model Number JH 19T14 MMD-MA1-AAAA
  • Usually ships in 2 – 3 Days
  • Condition: Brand New

 

 

Installation Available Upon Request

 

Price $3,949.95

 

See Our Pricing In Cart

Some of  our manufactures impose MAP restrictions we suggest you click and add to your cart for our complete pricing details.

Price: $3,949.95

Loading Updating cart…

Hatteland 19″ Marine TFT LCD Monitor AC

Hatteland 19″ Marine TFT LCD Monitor  AC

JH19T14MMD-AA1-AAAA  

 

 

 

19″ Series 1 Display: AC Power, Pad Controller, Brightness: 300 cd/m2, Native Resolution: 1280 x 1024, Contrast Ratio: 900:1, Aspect Ratio: 5:4, CCFL, PIP & PBP. 

 

Hatteland 19″ Marine Display Features

The Series 1 Maritime Multi Display (MMD) models are delivered with Multi-power (AC and DC power input built in) ensuring that they are compatible with all power systems on all vessels. It will automatically switch to whatever power is connected, making it highly flexible for shipbuilders and system integrators alike.

 

Connections include DVI-I in, RGB out, RGB in, IEC inlet, IEC outlet and USB I/O. Signal input/ output options can be increased upon request by using the Multifunction Connector, which allows the connection of many  ommon signal types through a single cable connection, for common signals such s; Composite Video Input, Touch Screen and Serial Communication. The models provide Picture-By- Picture (PBP) and Picture-In-Picture (PIP) functionality.

 

The unit features LED Backlight Technology instead of traditional CCFL Backlighting which increases the light intensity life time. Further, all models and variations can be offered with Optical Bonding Technology that mitigates screen misting. By factory standards the unit is ECDIS Compliant. Single AC model is also available.

 

T E S T I N G / A P P R O V A L S &                              C E R T I F I C A T E S
This product have been tested / type approved by the following classification societies:
  • IEC 60945 4th (EN 60945:2002)
  • ClassNK – Nippon Kaiji Kyokai
  • GL – Germanischer Lloyd
  • DNV – Det Norske Veritas
  • ABS – American Bureau of Shipping 
  • CCS – China Classification Society 
  • BV – Bureau Veritas 
  • LRS – Lloyd’s Register of Shipping
 
 
TFT Technology:
  • High Quality TFT with LED Backlight Technology
  • 19.0 inch viewable image size, Aspect Ratio 5:4
  • TFT active-matrix liquid crystal panel
  • MVA (Multi-domain Vertical Alignment) LCD Technology
 
TFT Characteristics:
  • Native Resolution : 1280 x 1024
  • Pixel Pitch (RGB) : 0.294 (H) x 0.294 (V) mm
  • Response Time : 20ms (typical), “black” to “white”
  • Contrast Ratio : 1000:1 (typical)
  • Light Intensity Standard : 300 cd/mÇ (typical)
  • Viewable Angle : +/- 89 deg. (typical) (Up/Down/Left/Right)
  • Active Display Area : 376.32 (H) x 301.056 (V) mm
  • Max Colors : 16.7 million
 
Synchronization:
Sync Signal:
  • Digital separate synchronisation
  • Composite synchronisation
  • Synchronisation on green.
  • Auto detects VGA -> WUXGA, interlaced and non interlaced
  • Video Signal : Analog RGB 0,7Vp-p

                  : Input Impedance 75 Ohm

Synchronization Range:
Horizontal : 15,0 kHz to 91,1 kHzVertical : 60 Hz* to 85 Hz* Recommended for optimum picture quality
 
 
Supported Signals:
Resolutions:
• VGA : 640 x 480 (including 640 x 350)
• SVGA : 800 x 600 (including 720 x 400)
• XGA : 1024 x 768*
• SXGA : 1280 x 1024
• UXGA : 1600 x 1200
• WUXGA : 1920 x 1200
* Recommended for optimum picture quality. (60 Hz only)
 
 
Video Signals (with Multifunction Cable):
VGA : 640 x 480 (including 640 x 350)SVGA : 800 x 600 (including 720 x 400)XGA : 1024 x 768SXGA : 1280 x 1024*UXGA : 1600 x 1200WUXGA : 1920 x 1200* Recommended for optimum picture quality. (60 Hz only)
 
 Video Signals (with Multifunction Cable):

  • Interlaced NTSC and PAL/SECAM video
  • Composite video

 

Power Specifications:
Power Supply Options:
115&230VAC – 50/60Hz 
 
Power Consumption: Operating : 100 W (max)

 

 
Physical Considerations:
• 483 (W) x 444 (H) x 82 (D) mm /    19.02″ (W) x 17.48″ (H) x 3.23″ (D)• Weight: 11.50 kg (approx)
 
 
Signal Terminals:
  • DVI-I Signal IN : 1 x 29p DVI Female (or as RGB IN with adapter)
  • RGB Signal IN : 1 x 15p HD D-SUB (female)
  • RGB Signal OUT : 1 x 15p HD D-SUB (female) – Clone of RGB IN**
  • Multifunction : 1 x 160p D-SUB (female) – Also see table below
  • USB I/O : 1 x TYPE B Conn. (female) Reserved for future use
  • AC Power IN : 1 x Std IEC Inlet
  • If AC Power OUT : 1 x Std IEC Outlet (5A Max)
  • If DC Power IN : 1 x 2p D-SUB Connector (male) – Amphenol FCC17

**Tested at recommended resolutions. The RGB output signal is at same resolution and sync as the RGB input. The output is working even if the display unit is turned off, but power cable/supply must be connected/provided.

 
 
Multifunction Cable:
Available factory standard cables, 30cm [11.81″] in length.

  • VSD100692-1 : 1 x 9P D-SUB (female) – RS-232 (COM1)
  • VSD100692-3 : 1 x 9P D-SUB (female) – RS-232 (COM1): 1 x 9P D-SUB (female) – RS-232 (COM Touch Screen) : 3 x BNC (female) (Composite Video in)
  • VSD100692-4 : 1 x 9P D-SUB (female) – RS-232 (COM1) : 3 x BNC (female) (Composite Video in)

Customized cables are possible to support more built-in signals, like: RS-485, RS-422/ RS-485, Buzzer, ON/OFF, Touch (PS/2), 1 x S-Video IN, Remote External User Controls, Alternative Keypad interface (i2c) and reserved for other signals. Custom cable lengths can be manufactured.

 
 
User Controls:
On front bezel – Keypad control (IP66) xxx-xxAx models:Power On/Off and On Screen Display Menu (push button) Brightness Control (up/down – push buttons) Hot keys (left/right – push buttons) Mode Status Red/Green/Orange Illuminated LED-Ring Indicator On front bezel – Potmeter control (IP66) xxx-xxBx models

Power On/Off and On Screen Display Menu (push button)

• Brightness Control (rotary control)

• Hotkeys (left/right – push buttons)

• Mode Status Red/Green/Orange Illuminated LED-Ring Indicator

• Speaker / Buzzer

 
 
Environmental Considerations:
• Operating : Temperature -15 deg. C to +55 deg. C– Humidity up to 95%• Storage : Temperature -20 deg. C to +60 deg. C– Humidity up to 95%• IP Rating : Protection (EN60529): IP66 front – IP20 rear• Compass Safe Dist. : JH19T14MMD-xxx-xxxx – Std: 1.60m Steering: 1.05m
 
 
Safety Considerations:
Even although the test conditions for bridge units provide for a maximum operating temperature of 55°C, continuous operation of all electronic components should, if possible, take place at ambient temperatures of only 25°C. This is a necessary prerequisite for long life and low service costs.
Available Accessories:                                             Please call or emails us for pricing and availability
             dave@marineitsolutions.com
• Cables = VSD100692-3, VSD100692-4 or customized cables

  • .JH MMDBR STD-A1 = Bracket
  • • JH 19BRD STD-A1 = Mounting Bracket EN60945 Tested
  • JH MMDRO STD-A1 = Rotary Bracket
  • • JH 19TSV STD-A1 = Sun Visor
  • • JH 19VED STD-A1 = Vesa Bracket
  • • JH 19TAP STD-A1 = 21″ CRT Adapter frame
  • • JH 19TAP STD-B1 = 21″ CRT Custom Adapter frame
  • • JH 19TAP STD-A2 = 20″ TFT Adapter frame
  • • JH 19TWC STD-B1 = Water Cover

*Please see user manual for drawings/measurements


 

  • Hatteland 19″ Monitor AC Model Number JH 19T14 MMD-AA1-AAAA
  • Usually ships in 2 – 3 Days
  • Condition: Brand New

 

 

Installation Available Upon Request

 

Price $3,799.95

 

See Our Pricing In Cart

Some of  our manufactures impose MAP restrictions we suggest you click and add to your cart for our complete pricing details.

Price: $3,799.95

Loading Updating cart…

Hatteland 19″ Slim Marine TFT LCD Monitor Multi-Power AC/DC

Hatteland 19″ Slim Marine TFT LCD Monitor Multi-Power AC/ DC

JH19T14MMD-MA1-SAAA  

 

 

 

19″ Series 1 Slim Display: AC/DC Multi-Power**, Pad Controller, Brightness: 300 cd/m2, Native Resolution: 1280 x 1024, Contrast Ratio: 900:1, Aspect Ratio: 5:4, CCFL, PIP & PBP.

 

Hatteland 19″ Marine Multi Display Features

The Series 1 Maritime Multi Display (MMD) models are delivered with Multi-power (AC and DC power input built in) ensuring that they are compatible with all power systems on all vessels. It will automatically switch to whatever power is connected, making it highly fl exible for shipbuilders and system integrators alike.

 

Connections include DVI-I in, RGB out, RGB in, IEC inlet, IEC outlet and USB I/O. Signal input/ output options can be increased upon request by using the Multifunction Connector, which allows the connection of many  ommon signal types through a single cable connection, for common signals such s; Composite Video Input, Touch Screen and Serial Communication. The models provide Picture-By- Picture (PBP) and Picture-In-Picture (PIP) functionality.

 

The unit features LED Backlight Technology instead of traditional CCFL Backlighting which increases the light intensity life time. Further, all models and variations can be offered with Optical Bonding Technology that mitigates screen misting. By factory standards the unit is ECDIS Compliant.

 

T E S T I N G / A P P R O V A L S &                              C E R T I F I C A T E S
This product have been tested / type approved by the following classification societies:
  • IEC 60945 4th (EN 60945:2002)
  • ClassNK – Nippon Kaiji Kyokai
  • GL – Germanischer Lloyd
  • DNV – Det Norske Veritas
  • ABS – American Bureau of Shipping 
  • CCS – China Classification Society 
  • BV – Bureau Veritas 
  • LRS – Lloyd’s Register of Shipping
 
 
TFT Technology:
  • High Quality TFT with LED Backlight Technology
  • 19.0 inch viewable image size, Aspect Ratio 5:4
  • TFT active-matrix liquid crystal panel
  • MVA (Multi-domain Vertical Alignment) LCD Technology
 
TFT Characteristics:
  • Native Resolution : 1280 x 1024
  • Pixel Pitch (RGB) : 0.294 (H) x 0.294 (V) mm
  • Response Time : 20ms (typical), “black” to “white”
  • Contrast Ratio : 1000:1 (typical)
  • Light Intensity Standard : 300 cd/mÇ (typical)
  • Viewable Angle : +/- 89 deg. (typical) (Up/Down/Left/Right)
  • Active Display Area : 376.32 (H) x 301.056 (V) mm
  • Max Colors : 16.7 million
 
Synchronization:
Sync Signal:
  • Digital separate synchronisation
  • Composite synchronisation
  • Synchronisation on green.
  • Auto detects VGA -> WUXGA, interlaced and non interlaced
  • Video Signal : Analog RGB 0,7Vp-p

                  : Input Impedance 75 Ohm

Synchronization Range:
Horizontal : 15,0 kHz to 91,1 kHzVertical : 60 Hz* to 85 Hz* Recommended for optimum picture quality
 
 
Supported Signals:
Resolutions:
• VGA : 640 x 480 (including 640 x 350)
• SVGA : 800 x 600 (including 720 x 400)
• XGA : 1024 x 768*
• SXGA : 1280 x 1024
• UXGA : 1600 x 1200
• WUXGA : 1920 x 1200
* Recommended for optimum picture quality. (60 Hz only)
 
 
Video Signals (with Multifunction Cable):
VGA : 640 x 480 (including 640 x 350)SVGA : 800 x 600 (including 720 x 400)XGA : 1024 x 768SXGA : 1280 x 1024*UXGA : 1600 x 1200WUXGA : 1920 x 1200* Recommended for optimum picture quality. (60 Hz only)
 
 Video Signals (with Multifunction Cable):

  • Interlaced NTSC and PAL/SECAM video
  • Composite video

 

Power Specifications:
Power Supply Options:
115&230VAC – 50/60Hz + 24 VDC – JH 19T14 MMD-Mxx-Axxx
 
Power Consumption: Operating : 100 W (max)

*Multi-Power: You may connect either AC power or DC power or both. In case both sources are connected, power will be sourced from the AC input. If AC input is lost, there will be a uninterrupted switch-over to DC input.

 
Physical Considerations:
• 460 (W) x 400 (H) x 82 (D) mm /    18.11″ (W) x 15.75″ (H) x 3.23″ (D)

• Weight: 10 kg (approx)

 
 
Signal Terminals:
  • DVI-I Signal IN : 1 x 29p DVI Female (or as RGB IN with adapter)
  • RGB Signal IN : 1 x 15p HD D-SUB (female)
  • RGB Signal OUT : 1 x 15p HD D-SUB (female) – Clone of RGB IN**
  • Multifunction : 1 x 160p D-SUB (female) – Also see table below
  • USB I/O : 1 x TYPE B Conn. (female) Reserved for future use
  • AC Power IN : 1 x Std IEC Inlet
  • If AC Power OUT : 1 x Std IEC Outlet (5A Max)
  • If DC Power IN : 1 x 2p D-SUB Connector (male) – Amphenol FCC17

**Tested at recommended resolutions. The RGB output signal is at same resolution and sync as the RGB input. The output is working even if the display unit is turned off, but power cable/supply must be connected/provided.

 
 
Multifunction Cable:
Available factory standard cables, 30cm [11.81″] in length.

  • VSD100692-1 : 1 x 9P D-SUB (female) – RS-232 (COM1)
  • VSD100692-3 : 1 x 9P D-SUB (female) – RS-232 (COM1): 1 x 9P D-SUB (female) – RS-232 (COM Touch Screen) : 3 x BNC (female) (Composite Video in)
  • VSD100692-4 : 1 x 9P D-SUB (female) – RS-232 (COM1) : 3 x BNC (female) (Composite Video in)

Customized cables are possible to support more built-in signals, like: RS-485, RS-422/ RS-485, Buzzer, ON/OFF, Touch (PS/2), 1 x S-Video IN, Remote External User Controls, Alternative Keypad interface (i2c) and reserved for other signals. Custom cable lengths can be manufactured.

 
 
User Controls:
On front bezel – Keypad control (IP66) xxx-xxAx models:Power On/Off and On Screen Display Menu (push button) Brightness Control (up/down – push buttons) 

Hot keys (left/right – push buttons) 

Mode Status Red/Green/Orange Illuminated

LED-Ring Indicator On front bezel – Potmeter control (IP66) xxx-xxBx models

Power On/Off and On Screen Display Menu (push button)

• Brightness Control (rotary control)

• Hotkeys (left/right – push buttons)

• Mode Status Red/Green/Orange Illuminated LED-Ring Indicator

• Speaker / Buzzer

 
 
Environmental Considerations:
• Operating : Temperature -15 deg. C to +55 deg. C– Humidity up to 95%• Storage : Temperature -20 deg. C to +60 deg. C– Humidity up to 95%• IP Rating : Protection (EN60529): IP66 front – IP20 rear• Compass Safe Dist. : JH19T14MMD-xxx-xxxx – Std: 1.60m Steering: 1.05m
 
 
Safety Considerations:
Even although the test conditions for bridge units provide for a maximum operating temperature of 55°C, continuous operation of all electronic components should, if possible, take place at ambient temperatures of only 25°C. This is a necessary prerequisite for long life and low service costs.
Available Accessories:                                             Please call or emails us for pricing and availability
          dave@marineitsolutions.com
• Cables = VSD100692-3, VSD100692-4 or customized cables

  • .JH MMDBR STD-A1 = Bracket
  • • JH 19BRD STD-A1 = Mounting Bracket EN60945 Tested
  • JH MMDRO STD-A1 = Rotary Bracket
  • • JH 19TSV STD-A1 = Sun Visor
  • • JH 19VED STD-A1 = Vesa Bracket
  • • JH 19TAP STD-A1 = 21″ CRT Adapter frame
  • • JH 19TAP STD-B1 = 21″ CRT Custom Adapter frame
  • • JH 19TAP STD-A2 = 20″ TFT Adapter frame
  • • JH 19TWC STD-B1 = Water Cover

*Please see user manual for drawings/measurements


 

  • Hatteland 19″ Monitor Model Number JH 19T14 MMD-MA1-SAAA
  • Usually ships in 2 – 3 Days
  • Condition: Brand New

 

 

Installation Available Upon Request

 

Price $4,499.95

 

See Our Pricing In Cart

Some of  our manufactures impose MAP restrictions we suggest you click and add to your cart for our complete pricing details.

Price: $4,499.95

Loading Updating cart…

Hatteland 22″ Marine Widescreen TFT Monitor AC 1680 X 1050

Hatteland 22″ Marine Widescreen TFT LCD Monitor  AC

JH22T11MMD-AA1-AABA  

 

 

22″ Series 1 Display: AC Power, Knob Controller, Brightness: 300 cd/m2, Native Resolution: 1680 x 1050, Contrast Ratio: 1000:1, Aspect Ratio: 16:10, CCFL, PIP & PBP. 

 

Hatteland 22″ Marine Widescreen Display Features

JH 22T11 MMD Widescreen 
The Series 1 Maritime Multi Display Widescreen (MMD) uses fewer cable connections than the previous generation, which increases reliability whilst reducing component costs. All models can be delivered with either AC or DC input as standard and connections include DVI-I in, RGB out, RGB in, IEC inlet, IEC outlet and USB I/O.

T E S T I N G / A P P R O V A L S &                              C E R T I F I C A T E S
This product have been tested / type approved by the following classification societies:
  • IEC 60945 4th (EN 60945:2002)
  • ClassNK – Nippon Kaiji Kyokai
  • GL – Germanischer Lloyd
  • DNV – Det Norske Veritas
  • ABS – American Bureau of Shipping 
  • LRS – Lloyd’s Register of Shipping 
  • BV – Bureau Veritas 
  • LRS – Lloyd’s Register of Shipping
 
 
TFT Technology:
• High Quality AU Optronics TFT• 22.0 inch viewable image size. Widescreen, Aspect ratio          16:10.

• Active Matrix, Thin Film Transistor (TFT)

• RGB Vertical Stripe

 
TFT Characteristics:
Native Resolution : 1680 x 1050• Pixel Pitch (RGB) :     0.282 (H) x 0.282 (V) mm• Response Time : 20 ms (typical), “black” to “white”

• Contrast Ratio : 1000:1 (typical)

• Light Intensity : 300 cd/m2 (typical)

• Viewable Angle : +/- 89 deg. (typical)   (Up/Down/Left/Right)

• Active Display Area : 473.76 (H) x 296.1 (V) mm

• Max Colors : 16.7 millions

 
Synchronization:
Sync Signal:
  • Digital separate synchronisation
  • Composite synchronisation
  • Synchronisation on green.
  • Auto detects VGA -> WUXGA, interlaced and non interlaced
  • Video Signal : Analog RGB 0,7Vp-p

                  : Input Impedance 75 Ohm

Synchronization Range:
Horizontal : 15,0 kHz to 91,1 kHzVertical : 60 Hz* to 85 Hz* Recommended for optimum picture quality
 
 
Supported Signals:
Resolutions:
• VGA : 640 x 480 (including 640 x 350)
• SVGA : 800 x 600 (including 720 x 400)
• XGA : 1024 x 768
• SXGA : 1280 x 1024
• UXGA : 1600 x 1200
• WUXGA : 1680 x 1050*
* Recommended for optimum picture quality. (60 Hz only)
 
 
 Video Signals (with Multifunction Cable):

  • Interlaced NTSC and PAL/SECAM video
  • Composite video

 

Power Specifications:
Power Supply Options:
115 & 230VAC – 50/60Hz 
 
Power Consumption: Operating : 100 W (max)
 
Physical Considerations:
• 572.50 (W) x 444.00 (H) x 82.00 (D) mm• 22.54″ (W) x 17.48″ (H) x 3.23″ (D)• Weight: 14.50 kg (approx)
 
 
Signal Terminals:
  • DVI-I Signal IN : 1 x 29p DVI Female

          (or as RGB IN with adapter)

  • RGB Signal IN : 1 x 15p HD D-SUB (female)
  • RGB Signal OUT : 1 x 15p HD D-SUB (female) –

          Clone of RGB IN**

  • Multifunction : 1 x 160p D-SUB (female) –

           Also see table below

  • USB I/O : 1 x TYPE B Conn. (female)

           Reserved for future use

  • AC Power IN : 1 x Std IEC Inlet
  • If AC Power OUT : 1 x Std IEC Outlet (5A Max)
  • If DC Power IN : 1 x 2p D-SUB Connector (male) –         Amphenol FCC17

**Tested at recommended resolutions. The RGB output signal is at same resolution and sync as the RGB input. The output is working even if the display unit is turned off, but power cable/supply must be connected/provided.

 
 
Multifunction Cable:
Available factory standard cables, 30cm [11.81″] in length.

  • VSD100692-1 : 1 x 9P D-SUB (female) – RS-232 (COM1)
  • VSD100692-3 : 1 x 9P D-SUB (female) – RS-232     (COM1): 1 x 9P D-SUB (female) – RS-232 (COM Touch Screen) : 3 x BNC (female) (Composite Video in)
  • VSD100692-4 : 1 x 9P D-SUB (female) – RS-232 (COM1) : 3 x BNC (female) (Composite Video in)

Customized cables are possible to support more built-in signals, like: RS-485, RS-422/ RS-485, Buzzer, ON/OFF, Touch (PS/2), 1 x S-Video IN, Remote External User Controls, Alternative Keypad interface (i2c) and reserved for other signals. Custom cable lengths can be manufactured.

 
 
User Controls:
On front bezel – Keypad control (IP66) xxx-xxAx models:Power On/Off and On Screen Display Menu (push button) Brightness Control (up/down – push buttons) Hot keys (left/right – push buttons) Mode Status Red/Green/Orange Illuminated LED-Ring Indicator On front bezel – Potmeter control (IP66) xxx-xxBx models
Power On/Off and On Screen Display Menu (push button)• Brightness Control (rotary control)• Hotkeys (left/right – push buttons)• Mode Status Red/Green/Orange Illuminated LED-Ring  

       Indicator

• Speaker / Buzzer

 
 
Environmental Considerations:
• Operating : Temperature -15 deg. C to +55 deg. C–     Humidity up to 95%• Storage : Temperature -20 deg. C to +60 deg. C– Humidity up to 95%• IP Rating : Protection (EN60529): IP66 front – IP20 rear

• Compass Safe Dist. : JH19T14MMD-xxx-xxxx – Std: 1.60m Steering: 1.05m

 
 
Safety Considerations:
Even although the test conditions for bridge units provide for a maximum operating temperature of 55°C, continuous operation of all electronic components should, if possible, take place at ambient temperatures of only 25°C. This is a necessary prerequisite for long life and low service costs.
Available Accessories:                                             Please call or emails us for pricing and availability
             dave@marineitsolutions.com
• Cables = Custom Multifunction Cable to support more signals• JH 22BRD STD-A1 = Mounting Bracket EN60945 Tested• JH 22TBR STD-A1 = Mounting Bracket

• JH MMDRO STD-A1 = Rotary Bracket

• JH 22VED STD-A1 = VESA Bracket

• JH 22TWC STD-A1 = Water Cover

• JH 22TSV STD-A1 = Sun Visor

*Please see user manual for drawings/measurements

 

Factory Options:

  • Capacitive Touch Screen (Requires Bonding)/ Optical Bonding Technology
  • Color Calibrated models (ECDIS)

 

Hatteland 22″ Widescreen Monitor AC

 

  • Model Number JH 22T11 MMD-AA1-AABA
  • Usually ships in 2 – 3 Days
  • Condition: Brand New

 

 

Installation Available Upon Request

 

Price $4,699.95

 

See Our Pricing In Cart

Some of  our manufactures impose MAP restrictions we suggest you click and add to your cart for our complete pricing details.

Price: $4,699.95

Loading Updating cart…

Hatteland 23.1″ Series 1 Display 1600 x 1200 – AC/ DC Multi-Power LED Backlight

Hatteland 23.1″ Series 1 Display 1600 x 1200 – AC/ DC Multi-Power LED  Backlight

JH23T14MMD-MA1-AABA  

 

_

23″ Series 1 Display: AC/DC Multi-Power**, Knob Controller, Brightness: 400 cd/m2, Native Resolution: 1600 x 1200, Contrast Ratio: 600:1, Aspect Ratio: 4:3, LED Backlight, PIP & PBP. 

 

Hatteland 23.1″ Marine Widescreen Display Features

JH 23T14 MMD Widescreen 
The Series 1 Maritime Multi Display (MMD) models are delivered with Multi-power (AC and DC power input built in) ensuring that they are compatible with all power systems on all vessels. It will automatically switch to whatever power is connected, making it highly flexible for shipbuilders and system integrators alike. Connections in addition include DVI-I in, RGB out, RGB in, IEC outlet and USB I/O.

 

The unit features LED Backlight Technology instead of traditional CCFL Backlighting which increases the light intensity life time. Further, with Optical Bonding Technology the viewing performance, reliability and lifespan increases dramatically. Bonding will also help with problems related to condensation, sunlight reflection, night vision and overheating. By factory standards the unit is ECDIS Compliant.

 

T E S T I N G / A P P R O V A L S &                              C E R T I F I C A T E S
This product have been tested / type approved by the following classification societies:
  • IEC 60945 4th (EN 60945:2002)
  • ClassNK – Nippon Kaiji Kyokai
  • GL – Germanischer Lloyd
  • DNV – Det Norske Veritas
  • ABS – American Bureau of Shipping 
  • LRS – Lloyd”s Register of Shipping 
  • BV – Bureau Veritas 
  • LRS – Lloyd’s Register of Shipping
 
 
TFT Technology:
 

• High Quality SHARP TFT with LED Backlight Technology

• 23.1 inch viewable image size

• TFT active-matrix liquid crystal panel

• MVA (Multi-domain Vertical Alignment) LCD Technology 

 

TFT Characteristics:

• Pixel Number : 1600 x 1200• Pixel Pitch (RGB) : 0.294 (H) x 0.294 (V) mm

• Response Time : 12ms (typ) black-white-black or 8ms gray to gray

• Contrast Ratio : 600:1 (typical)

• Light Intensity : 400 cd/m2 (typical)

• Viewable Angle : +/- 85 deg. (typical) (Up/Down/Left/Right)

• Active Display Area : 470.4 (H) x 352.8 (V) mm

• Max Colors : 16.7 millions 

 

Synchronization:

Sync Signal:

• Digital separate synchronisation

• Composite synchronisation

• Synchronisation on green.

• Auto detects VGA -> WUXGA, interlaced and non interlaced

• Video Signal : Analog RGB 0,7Vp-p

: Input Impedance 75 Ohm

Synchronisation Range:

• Horizontal : 15,0 kHz to 91,1 kHz

• Vertical : 60 Hz* to 85 Hz

* Recommended for optimum picture quality  

 

Supported Signals:

Resolutions:

• VGA : 640 x 480 (including 640 x 350)

• SVGA : 800 x 600 (including 720 x 400)

• XGA : 1024 x 768

• SXGA : 1280 x 1024

• UXGA : 1600 x 1200*

• WUXGA : 1920 x 1200

* Recommended for optimum picture quality. (60 Hz only) 

 

Video Signals (with Multifunction Cable):

• Interlaced NTSC and PAL/SECAM video

• Composite video 

 

Power Specifications:

Multi-Power Supply Options:• 115&230VAC – 50/60Hz + 24 VDC –

JH 23T14 MMD-Mxx-xxxx

Note: You may connect either AC power or DC power or both. In case both sources are connected, power will be sourced from the AC input. If AC input is lost, there will be a uninterrupted switch-over to DC input.

 

Power Consumption: 

Operating : 100 W (max)Operating : 95W (TYP) – 125W (MAX)

 

Physical Considerations:

• 584 (W) x 534 (H) x 85 (D) mm – 22.99″ (W) x 21.02″ (H) x 3.35″ (D)

• Weight: 18 kg  

 

Signal Terminals:

• DVI-I Signal IN : 1 x 29p DVI Female (or as RGB IN with adapter)

• RGB Signal IN : 1 x 15p HD D-SUB (female)

• RGB Signal OUT : 1 x 15p HD D-SUB (female) –

    Clone of RGB IN**

• Multifunction : 1 x 160p D-SUB (female) – Also see table below

• USB I/O : 1 x TYPE B Conn. (female) Reserved for future use

• AC Power IN : 1 x Std IEC Inlet

• DC Power IN : 1 x 2p D-SUB Connector (male) – Amphenol FCC17

• AC Power OUT : 1 x Std IEC Outlet (5A Max)

**Tested at recommended resolutions. The RGB output signal is at same resolution

and sync as the RGB input. The output is working even if the display unit is turned off,

but power cable/supply must be connected/provided. 

 

Multifunction Cable:

• VSD100692-1 : 1 x 9P D-SUB (female) – RS-232 (COM1)

• VSD100692-3 : 1 x 9P D-SUB (female) – RS-232 (COM1)

: 1 x 9P D-SUB (female) – RS-232 (COM Touch Screen)

: 3 x BNC (female) (Composite Video in)

• VSD100692-4 : 1 x 9P D-SUB (female) – RS-232 (COM1)

: 3 x BNC (female) (Composite Video in)

Customized cables are possible to support more built-in signals, like: RS-485, RS-422/

RS-485, Buzzer, ON/OFF, Touch (PS/2), 1 x S-Video IN, Remote External User Controls,

Alternative Keypad interface (i2c) and reserved for other signals. Custom cable lengths

can be manufactured.  

 

User Controls:

On front bezel – Keypad control (IP66) xxx-xxAx models:

• Power On/Off and On Screen Display Menu (push button)

• Brightness Control (up/down – push buttons)

• Hotkeys (left/right – push buttons)

• Mode Status Red/Green/Orange Illuminated LED-Ring Indicator

    On front bezel – Potmeter control (IP66) xxx-xxBx models:

• Power On/Off and On Screen Display Menu (push button)

• Brightness Control (rotary control)

• Hotkeys (left/right – push buttons)

• Mode Status Red/Green/Orange Illuminated LED-Ring Indicator

• Speaker / Buzzer  

 

Environmental Considerations:

• Operating : Temperature -15 deg. C to +55 deg. C– Humidity up to 95%

• Storage : Temperature -20 deg. C to +60 deg. C

– Humidity up to 95%

• IP Rating : Protection (EN60529): IP66 front – IP20 rear

• Compass Safe Dist. : JH23T14MMD-xxx-xxxx – Std: 1.60m Steering: 1.05m  

 

Safety Considerations:

Even although the test conditions for bridge units provide for a maximumoperating temperature of 55°C, continuous operation of all electronic

components should, if possible, take place at ambient temperatures of only

25°C. This is a necessary prerequisite for long life and low service costs.

 

Available Accessories:

Please call or emails us for pricing and availability dave@marineitsolutions.com

• Cables = Custom Multifunction Cable to support more signals

• JH 23TBR T01-A1 = Bracket (See user manual)

• JH 23BRD STD-A1 = Mounting Bracket EN6095 Tested (See manual)

• JH MMDRO STD-A1 = Rotary Bracket (See user manual)

• JH 23TSV STD-A1 = Sun Visor (See user manual)

• JH 23VED STD-A1 = Vesa Bracket (See user manual)

• JH 23TWC STD-A1 = Water Cover (See user manual)

 

Factory Options:

 

  • Capacitive Touch Screen (Requires Bonding)/ Optical Bonding Technology
  • Color Calibrated models (ECDIS)

 

Hatteland 23.1″ Widescreen Monitor AC

Model Number JH 23T14 MMD-MA1-AABA

 

  • Usually ships in 2 – 3 Days
  • Condition: Brand New

 

 

Installation Available Upon Request

 

Price $6,499.95

 

See Our Pricing In Cart

Some of  our manufactures impose MAP restrictions we suggest you click and add to your cart for our complete pricing details.

Price: $6,499.95

Loading Updating cart…

Hatteland 26″ Series 1 Widescreen TFT Display Multi-Power AC/DC 1920 X 1200

Hatteland 26″ Series 1 Widescreen TFT Display Multi-Power AC/DC  1920 X 1200 

JH26T11MMD-MA1-AOBA  

 

 

 

26″ Series 1 Display: AC Power, Optical Bonding, Knob Controller, Brightness: 350 cd/m2, Native Resolution: 1920 x 1200, Contrast Ratio: 1500:1, Aspect Ratio: 16:10, CCFL, PIP & PBP 

 

Hatteland 25.54″ Series 1 Widescreen Display Features

JH 26T11 MMD Widescreen 

This Series 1 widescreen is by factory default optically bonded which ensures that the unit offers excellent viewing clarity and will not suffer from condensation or misting. Further, Optical Bonding Technology strengthens the display against impact, making it extremely durable in all conditions.
_
Signal input/output options can be increased upon request by using the Multifunction Connector, which allows the connection of many common signal types through a single cable connection, for common signals such as; Composite Video Input, Touch Screen and Serial Communication. By factory standards the unit is ECDIS Compliant and feature LED or CCFL Backlight Technology.
T E S T I N G / A P P R O V A L S &                              C E R T I F I C A T E S
This product have been tested / type approved by the following classification societies:
  • IEC 60945 4th (EN 60945:2002)
  • ClassNK – Nippon Kaiji Kyokai
  • GL – Germanischer Lloyd
  • DNV – Det Norske Veritas
  • ABS – American Bureau of Shipping 
  • LRS – Lloyd”s Register of Shipping 
  • BV – Bureau Veritas 
  • LRS – Lloyd’s Register of Shipping
 
 
TFT Technology:
High Quality TFT with LED or CCFL Backlight Technology Optical Bonding Terchnology. 25.54 inch viewable image size – Widescreen, Aspect Ratio 16:10 S-MVA, Active Matrix, Thin Film Transistor (TFT) RGB Vertical Stripe
 
TFT Characteristics:
Native Resolution : 1920 x 1200Pixel Pitch (RGB) : 0.2865 (H) x 0.2865 (V) mmResponse Time (CCFL) : 8 ms (typical), “gray” to “gray”

Response Time (LED) : 20 ms (Tr+Tf)Contrast Ratio : 1500:1 (typical)

Light Intensity : 350 cd/m2 (typical)

Viewable Angle : +/- 88 deg. (typical) (Up/Down/Left/Right)

Active Display Area : 550.08 (H) x 343.8 (V) mm

Max Colors : 16.7 millions

 
Synchronization:
Sync Signal:
  • Digital separate synchronisation
  • Composite synchronisation
  • Synchronisation on green.
  • Auto detects VGA -> WUXGA, interlaced and non interlaced
  • Video Signal : Analog RGB 0,7Vp-p

                  : Input Impedance 75 Ohm

Synchronization Range:
Horizontal : 15,0 kHz to 91,1 kHzVertical : 60 Hz* to 85 Hz* Recommended for optimum picture quality
 
 
Supported Signals:
Resolutions:
• VGA : 640 x 480 (including 640 x 350)
• SVGA : 800 x 600 (including 720 x 400)
• XGA : 1024 x 768
• SXGA : 1280 x 1024
• UXGA : 1600 x 1200
• WUXGA : 1920 x 1200*
 * Recommended for optimum picture quality. (60 Hz only)
 
 
 Video Signals (with Multifunction Cable):

  • Interlaced NTSC and PAL/SECAM video
  • Composite video

 

Power Specifications:
Power Supply Options:
115 & 230VAC – 50/60Hz + 24 VDC*
*Multi-power note: You may connect either AC power or DC power or both. In case both sources are connected, power will be sourced from the AC input. If AC input is lost, there will be a uninterrupted switch-over to DC input._
Power Consumption:                                                    Operating : 122 W (TYP) – 185W (max)
 
Physical Considerations:
635.00 (W) x 499.00 (H) x 101.50 (D) mm                       25.00″ (W) x 19.65″ (H) x 4.00″ (D)                                Weight: 15 kg (approx)
 
 
Signal Terminals:
  • DVI-I Signal IN : 1 x 29p DVI Female

          (or as RGB IN with adapter)

  • RGB Signal IN : 1 x 15p HD D-SUB (female)
  • RGB Signal OUT : 1 x 15p HD D-SUB (female) –

          Clone of RGB IN**

  • Multifunction : 1 x 160p D-SUB (female) –

           Also see table below

  • USB I/O : 1 x TYPE B Conn. (female)

           Reserved for future use

  • AC Power IN : 1 x Std IEC Inlet
  • If AC Power OUT : 1 x Std IEC Outlet (5A Max)
  • If DC Power IN : 1 x 2p D-SUB Connector (male) –         Amphenol FCC17

**Tested at recommended resolutions. The RGB output signal is at same resolution and sync as the RGB input. The output is working even if the display unit is turned off, but power cable/supply must be connected/provided.

 
 
Multifunction Cable:
Available factory standard cables, 30cm [11.81″] in length.

  • VSD100692-1 : 1 x 9P D-SUB (female) – RS-232 (COM1)
  • VSD100692-3 : 1 x 9P D-SUB (female) – RS-232     (COM1): 1 x 9P D-SUB (female) – RS-232 (COM Touch Screen) : 3 x BNC (female) (Composite Video in)
  • VSD100692-4 : 1 x 9P D-SUB (female) – RS-232 (COM1) : 3 x BNC (female) (Composite Video in)

Customized cables are possible to support more built-in signals, like: RS-485, RS-422/ RS-485, Buzzer, ON/OFF, Touch (PS/2), 1 x S-Video IN, Remote External User Controls, Alternative Keypad interface (i2c) and reserved for other signals. Custom cable lengths can be manufactured.

 
 
User Controls:
On front bezel – Potmeter control (IP66) xxx-xxBx models:   Power On/Off and On Screen Display Menu (push button) Brightness Control (rotary control) and Hotkeys         (left/right – push buttons) Mode Status Red/Green/Orange Illuminated LED-Ring Indicator and Speaker / Buzzer
 
 
Environmental Considerations:
Operating : Temperature -15 deg. C to +55 deg. C–     Humidity up to 95%                                                       Storage : Temperature -20 deg. C to +60 deg. C– Humidity up to 95% IP Rating : Protection (EN60529): IP66 front – IP20 rear Compass Safe Dist. : JH19T14MMD-xxx-xxxx – Std: 1.60m Steering: 1.05m
 
 
Safety Considerations:
Even although the test conditions for bridge units provide for a maximum operating temperature of 55°C, continuous operation of all electronic components should, if possible, take place at ambient temperatures of only 25°C. This is a necessary prerequisite for long life and low service costs.
Available Accessories:                                             Please call or emails us for pricing and availability
            dave@marineitsolutions.com
Cables = Custom Multifunction Cable to support more signals                                                                         JH 26BRD STD-A1 = Mounting Bracket EN60945 Tested JH 26TBR STD-A1 = Mounting BracketJH MMDRO STD-A1 = Rotary BracketJH 26TSV STD-A1 = Sun VisorJH 26VED STD-A1 = Vesa Bracket

JH 26TWC STD-A1 = Water Cover

*Please see user manual for drawings/measurements.

 

Factory Options:

  • Capacitive Touch Screen (Requires Bonding)/ Optical Bonding Technology
  • Color Calibrated models (ECDIS)

 

Hatteland 26″ Widescreen Monitor AC


  • Model Number JH 26T11 MMD-MA1-AOBA
  • Usually ships in 2 – 3 Days
  • Condition: Brand New

 

 

Installation Available Upon Request

 

Price $5,199.95

 

See Our Pricing In Cart

Some of  our manufactures impose MAP restrictions we suggest you click and add to your cart for our complete pricing details.

Price: $5,199.95

Loading Updating cart…
LoadingUpdating…